Kontakt Logg inn
Kontakt Logg inn

Obelux CSW Fault Monitoring Unit

For controlling and monitoring Obelux DC obstruction lights
Produktnummer: CSW-DCW-B

Obelux CSW unit is used for controlling and monitoring Obelux DC operated aviation obstruction lights. CSW has 4 independent outputs for monitoring lights at each output. Output fault monitoring is based on power consumption. Alarm window can be selected with dial switches independently for all outputs. This unit can control the flash sequence and day/night mode for the lights. GPS flash synchronization and GSM monitoring are available as options.

Key features

  • 4 independent outputs with power monitoring at each output
  • Integrated photocell, external photocell option (PCE-DCW-F) for day/night mode change
  • Several flashing modes
  • GPS flash synchronization as an option
  • GSM fault monitoring system as an option (SMS alarms)
  • Alarm output (dry contact)
  • Long maintenance-free lifetime
  • Main/spare switch-over
Mechanical characteristics
Shock-resistant polycarbonate enclosure (IP65)
Enclosure dimensions (WxHxD): 300 mm x 200 mm x 132 mm
Weight 1.9 kg
Cable glands: 5 x M25 (9-17 mm cable diameter) and 2 x M16 (4.5-10 mm cable diameter)
Electrical characteristics
Wide operating voltage range 10-60VDC
User selectable operating parameters
User selectable photocell sensitivity
Fault monitoring based on power consumption of each output
Maximum continuous current 6A per output
Potential-free relay alarm (dry contact), (must be equal to lamp voltage)
Power consumption < 1 W
Operating temperature range -40 °C to +55 °C
Specifications met
ICAO International Standards and Recommended Practices: Aerodromes Annex 14 Volume 1, 6th Edition, July 2013, Chapter 6
FAA Advisory Circular AC 150/5345-43G