The Teledyne LeCroy 280 HDMI/HDBaseT Video Generator (Tx) and Analyzer (Rx) is small compact, battery powered test set ideally suited for professional A/V integrators and home theatre installers. This convenient test set enables you to conduct basic verification and diagnostic tests on HDMI/HDBaseT cables, video distribution networks and individual A/V components. The HDMI input and output ports support testing up to 18 Gbps data rate and 600 MHz pixel rate and the HDBaseT input and output ports support testing up to 300 MHz pixel rate.
The 280G/A instrument set’s features and convenient operation can shorten time on the job site and reduce callbacks by enabling you to run basic verification and diagnostic tests on complex video distribution installations quickly and efficiently.
Test Devices and Cables - Test HDMI and HDBaseT cables, devices, components and entire video distribution networks end to end up to 18G (HDMI).
Verify Connection and Operation - Verify hot plug, 5V, EDID, HDCP, Video transmission through a video distribution network.
Test for Interoperability - Check interoperability between video sources, displays and distribution equipment.
Diagnose Failures - Diagnose video and protocol failures in cables, video distribution devices and components.
Quick, Clear Results - Simple Pass/Fail test indication on LCD display offers quick “Time-to-Insight.”
Reports - HTML formatted reports of tests performed to demonstrate proper network turn up.
Carrying Case - Optional handy optional carrying case available
|<strong>Interfaces - 280G</strong>|
|HDMI Tx – Connector: Type A; Pixel rate: Up to 600 MHz; TMDS rate: up to 18 Gbps. Video Type/Sampling: RGB/YCbCr 4:4:4, 4:2:2, 4:2:0 24/30/36 bit color; Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5. Note: Deep color supported only up to 1080p60 resolution.|
|HDBaseT Tx – Connector: RJ-45; Pixel rate: Up to 300 MHz; TMDS rate: up to 9 Gbps. Video Type/Sampling: RGB/YCbCr 4:4:4, 4:2:2, 4:2:0 24/30/36 bit color; Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.|
|<strong>Interfaces - 280A</strong>|
|HDBaseT Rx – Connector: RJ-45; Pixel rate: Up to 300 MHz.|
|<strong>Operation (both units)</strong>|
|Embedded touch screen – Screen size: 480 x 272 resolution; 24 bit RGB color.|
|<strong>Physical (each unit)</strong>|
|Power (Battery) – Type C batteries; 4-6 hours battery life on an overnight charge.|
|Power (AC) – VAC 100 to 240VAC; Power: 24 VA; Frequency: 47 – 63Hz.|
|Dimensions – Height 7.1 inches (18.04 cm); Width: 7.4 inches (18.79 cm); Depth: 1.25 inches (3.18 cm).|
|Weight – 2.15 LBS (0.95 Kg).|
|Environmental – Humidity: 30% – 80% RH non-condensing; Operating Temp: 32 – 104 F (0 – 40 C).|