BESKRIVELSE
The TPR1000 and TPR4000 probes provide a low noise, large offset range solution for measurement of ripple on DC power rails ranging from –60 to 60 VDC. Tektronix’s power rail probes offer industry leading low noise and high offset range required to measure AC ripple between 200 μVp-p and 800 mVp-p at up to 4 GHz.
SPESIFIKASJONER
Compatible with the 6 series MSO, 5 series MSO, MSO/DPO3000, MDO/DPO4000, MSO/DPO5000, DPO7000, and DPO70000 oscilloscopes: |
DPO70000 oscilloscopes require the optional TCA-VPI50 adapter. |
Bandwidth, DC coupling mode: DC to 1 GHz: | Frequency response optimized for <1 Ω source impedance. Through SMA-to-SMA cable or Solder Micro-Coax tip. |
Bandwidth, DC reject mode: 10 kHz to 1 GHz: | Frequency response optimized for <1 Ω source impedance. Through SMA-to-SMA cable or Solder Micro-Coax tip. |
Linear dynamic range: Up to 60 V DC, 1Vp-p to bandwidth: | Max AC RMS of 1 V. |
Attenuation: 1.25x: | Frequency response optimized for <1 Ω source impedance. |
Measurement accuracy: DC linearity: <0.1% w/ Step response long-term aberrations: ±1%: | – |
Noise: <300 μVp-p noise on 6 Series MSO (20 MHz BW Limit) and <1 mVp-p noise on 6 Series MSO (Full Bandwidth): | – |
Input impedance: 50 kΩ DC to 10 kHz and 50 Ω AC > 100 kHz: | – |
Temperature range at tip: –40 to +85 °C (standard accessories) and –40 to +155 °C (high temperature cable option): | Comp box and oscilloscope temperature range limited to 0 to +55 °C |
Offset: ±60 V offset range w/ Offset setting error: ±2 mV max, ±0.4 μV typical: | – |
DOKUMENTASJON
Brochure: |
Tektronix TPR100/TPR4000
|