Tek-WBG-Bundle1
Tek-WBG-Bundle1
03-19 Tek-TPR4000-04_power rail
03-19 Tek-TPR4000-04_power rail
Application scheme
Application scheme
Tek-WBG Bundle4
Tek-WBG Bundle4
Tek-WBG-Bundle2
Tek-WBG-Bundle2
Tek-WBG-Bundle3
Tek-WBG-Bundle3
03-19 TekPower_Fig3
03-19 TekPower_Fig3
03-19 Tek Power_Fig2
03-19 Tek Power_Fig2

SiC and GaN FET Switching Power

Analysis kit
Ultra-fast power semiconductor switching technology such as SiC or GaN that make up some of today’s power electronics topologies, are extremely difficult to optimize.
Produktnummer: POWERSOL1
BESKRIVELSE

Ultra-fast power semiconductor switching technology such as SiC or GaN that make up some of today’s power electronics topologies, are extremely difficult to optimize. The SiC MOSFET and GaN FET Switching Power Converter Analysis Kit is the only solution in the market that can accurately characterize all the critical parameters for optimizing Power Electronics topologies that use technology like SiC and GaN, including:

  • Gate charge and gate-drive performance on high-side low-side
  • Dead-time optimization including accurate turn-on, turn-off and gate-drive timing
  • VGS, VDS and ID measurements on high-side and low-side switches
  • Switching loss, conduction loss and magnetic loss analysis

 

Link til Tektronix produktside med info, videoer og application notes Klikk her

SPESIFIKASJONER
What’s in the PowerSol1 system?
5 Series MSO Oscilloscope High resolution (12 bit) for testing Vgs, RDS_ON and conduction losses under real conditions.
5-PWR software Automated, accurate and repeatable power measurements for calculating switching losses, conduction losses, RDS_ON, magnetic losses, SOA and much more under real operating conditions.
TIVH08 IsoVu isolated differential voltage probe 2.5 KV differential voltage rating for testing VDS signals on high voltage SiC and GaN power converters. Also has 800 MHz bandwidth for extremely fast dv/dt common to SiC and GaN power devices.
TIVM1 IsoVu isolated differential probe (Optional) 1 GHz bandwidth for extremely fast dv/dt on low voltage (<50 V) signals such as VGS and shunt voltage.
TIVH05 IsoVu isolated differential voltage probe (Optional) 2.5 KV differential voltage rating for testing VDS signals on high voltage SiC and GaN power converters. Also has 500 MHz bandwidth for extremely fast dv/dt common to SiC and GaN power devices.
TPP1000 high bandwidth passive probe (Standard Accessory) comes as standard equipment with your oscilloscope; one probe per channel. 1 GHz bandwidth for testing ground referenced high dv/dt signals such as VGS_LOW and shunt voltage.
MMCX shielded tip for high bandwidth passive probe (Optional) makes the high frequency ground referenced measurements more accurate by eliminating ground loops. Watch this video on creating unplanning test points with the MMCX connectors here (206-0663-xx).
DOKUMENTASJON