The DT-421D module is a converter from ASI to IP that allows linking an IP network to a MPEG-2 ASI network. Each one of the services or even the input TS is packaged in an IP / UDP or IP / RTP / UDP stream, with an IP address (Multicast) and an UDP port specified by the user.
SPTS outputs operating mode.
It is a converter from ASI to IP multicast SPTS streams. The module assigns a multicast IP to each one of the selected services. The result is delivered at the Ethernet output so each service is a multicast SPTS TS-IP, up to 40 (10 per ASI).
MPTS outputs operating mode.
Four streams multicast MPTS TS-IP come out from the Ethernet output, containing the same services and DVB-SI tables as the TS-ASI input.
|4 x DVB-ASI. BNC Female connector, 75 Ω (108 Mbps maximum per input)|
|Ethernet 100/1000 Mbps. RJ45 connector.|
|Communication Protocol UDP or RTP/UDP.|
|Transmission methode MULTICAST.|
|Payload 7 MPEG-2 packets.|
|CONFIGURATION AND POWER SUPPLY|
|Via the DT-800 Control and Power Module. Control can be made remotely from to PC|