NOK 850,- (eks. mva.)
The DCV-J is an economical, easy to use 1/8 DIN screwdriver trimmed (Zero & Span pots) direct reading DC digital panel Voltmeter for display-only applications.
0-2V to 200V input. Accuracy 0.1% of range, /- 1count.
Not scalable. If you need a scalable meter, use PRO-J.
The Junior range is ideal for general purpose monitoring applications. All meters have 3 1/2 digits, and you can add an extra fixed-zero digit to multiply the reading by 10.
For trouble-free installation and maintenance, we’ve used detachable screw connectors.
Select coarse input ranges with rear mounted jumpers, and fine trim with multiturn Zero and Span potentiometers. The meter can stay in the the panel for all adjutments.
As with all our 1/8 DIN meters, you can add a units-of-measure label behind the protective front lens.
|Input ranges Jumper switch selectable:-|
|Digits 3 1/2 digits [?], 14mm high. Legible up to 7 metres away.|
|Digit colour Red or green (variable brightness option available)|
|Scaling Zero and Span potentiometers|
|Filtering Fixed 0.5 Second basic filtering. 1.0 Seconds on True RMS version|
|Front panel controls Zero and Span potentiometers. Decimal point position jumper switch.|
|Power options 11-30VDC, 24VAC, 48VAC, 110VAC or 240VAC. 4 watts max.|
|Accuracy +/-0.25% of range +/-1 count for inputs over 1% of range|
|Thermal stability - range +/- 100ppm/oC|
|Thermal stability - offset +/- 50ppm/oC|
|Connectors Detachable screw terminals|
|Bezel size 96mm wide x 48mm high. 13mm forward.|
|Panel cutout 92mm wide x 45mm high. +1mm, -0mm|
|Depth behind panel 93mm including connectors + cable.|
|Sealing IP54 standard, IP67 with optional SPC4 cover|