Kontakt Logg inn
Kontakt Logg inn
Keithley 2230G 2000_2000
Keithley 2230G 2000_2000
Family picture 2230G_2000_2000
Family picture 2230G_2000_2000
2_wire_4_wire picture_2000_2000
2_wire_4_wire picture_2000_2000

Keithley 2230G-30-6, High Power, 3-Channel Programmable Power Supplies

Programmable 3-Channel Power Supply, 375 W, Two 30 V, 6 A Channels, One 5 V, 3 A Channel

Nortelco Electronics har fått ny webside og webshop

Nortelco Electronics AS ble Adeptor AS fra 1. januar 2022, men dine kontaktpersoner er de samme! Endringen gjelder områdene Elektronikk og Automasjon, og vi har fått ny webside:

With Keithley 2230G series you can choose between one 195 W model and two 375 W models, where the 195 W model has two 30 V, 3 A channels and one 5 V, 3 A channel, while the 375 W models have two 30 V, 6 A channels or two 60 V, 3 A channels and one 5 V, 3 A channel. All channels are independently controlled and are isolated to power a wide range of test setups USB, GPIB, and RS-232 interfaces enable complete control of the 2230G power supplies from a PC. LabView and IVI drivers facilitate instrument control, data logging, and analysis. Series 2230G power supplies can be controlled in either a semi-automated or full-automated test system with these drivers or software packages such as MatLab.
Send forespørsel
4 uker leveringstid
Produktnummer: 2230G-30-6

The Series 2230G 3-channel programmable power supplies provide up to 375 W of power in a space-saving 2U high, half-rack width enclosure to power automotive circuits, LED drivers, power supplies, power ICs, and other high-power circuits. The 2230G-30-3 offers 195 W with two 30 V, 3 A channels and a 5 V, 3 A channel. The 2230G-30-6 and the 2230-60-3 supplies output as much as 375 W. The 2230G-30-6 provides two 30 V, 6 A channels, while the 2230G-60-3 has two 60 V, 3 A channels. Both 375 W supplies have a 5 V, 3 A channel as the third channel. These three supplies are linear power supplies; thus, they are low noise supplies to have minimal impact on a device-under-test (DUT). Each channel has a rectangular output characteristic to enable obtaining the full current at the maximum voltage so that the 2230G-30-6 can supply 30 V to a 6 A load and the 2230G-60-3 can supply 60 V to a 3 A load.

Choose from one 195 W model and two 375 W models
375W with two 30 V/6 A channels and one 5 V/3 A channel
All channels are independently controlled and are isolated to power a wide range of test setups
All channels have remote sensing so the programmed voltage is accurately applied to the load
Set and monitor output voltages with 0.03% basic accuracy and 1 mV resolution
Monitor load current with 0.1% basic accuracy and 1 mA resolution
Low noise, linear regulation with <1 mV rms ripple and noise
Voltage and current outputs of three channels are displayed simultaneously for immediate observation of each output state
USB, GPIB, and RS-232 interfaces and rear panel connections for automated test convenience