Hense Belt Scales BW 10 and BW 20
Nortelco Electronics har fått ny webside
Nortelco Electronics AS ble Adeptor AS fra 1. januar 2022, men dine kontaktpersoner er de samme! Endringen gjelder områdene Elektronikk og Automasjon, og vi har fått ny webside.
The BW 10/20 belt-scale consists of a robust angle steel frame; Due to the low profile construction the scale can be integrated into nearly every existing conveyor belt system. The high precision load cell inside the frame is protected against shock loads by an adjustable overload limit. Because of the special force guide periodic maintenance is not required.
The material flow causes a load via the belt onto the idler. This is picked up by the weighing frame and conducted into the high-precision, stainless steel load cell. Optionally a converter amplifies the signal on-site and transmits the weight signal over distances of up to 600 m to the instrumentation control unit. The instrumentation multiplies the weight signal with the belt speed, which is detected by a robust wheel running on the underbelt. The instrumentation simultaneously displays the flow rate (t/h) and the absolute quantity. There are 2/4 counters and various inputs and outputs available.
All Hense Wägetechnik belt-scales and weigh feeders are based on more than 30 years of experience of operation in stationary and mobile applications. All the belt scales are distinguished by a simple and fail-safe design and low, price to performance ratio. Take advantage of our experience based on several hundred installations. The dual idler belt scale helps to improve the weighing accuracy for truck loading and batching application. We also recommend to use dual idler scales for feed rates below 50t/h.
For chemical industry, plastic Production, building industry, food industry, sand & gravel and recycling | |
Simple installation | |
Maintenance-free | |
Short delivery time | |
Low total height | |
Integral transport and overload protection |