Kontakt Logg inn
Kontakt Logg inn
helmholz_PN-PN_Coupler_700-158-3PN01

Helmholz PN/PN Coupler

PN/PN Coupler V2, uncomplicated connection of two separate PROFINET networks

Nortelco Electronics har fått ny webside og webshop

Nortelco Electronics AS ble Adeptor AS fra 1. januar 2022, men dine kontaktpersoner er de samme! Endringen gjelder områdene Elektronikk og Automasjon, og vi har fått ny webside:

Produktnummer: 700-158-3PN02
BESKRIVELSE

With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks.

The maximum size of the transmitted IO data is 1024 bytes. Up to 16 slots for IO modules of 1 byte and up to 128 bytes are available. The incorporation into the PLC engineering tool is made possible by a GSDML file; special configuration software isn’t necessary.

SPESIFIKASJONER
Very compact design for DIN rail mounting
Exchange of up to 1024 bytes of I/O data
Redundant power supply
Galvanic separation of the nets
Configuration only with GSDML file, no further software required
No influence on the opposite side in case of failure of the bus system
PROFINET transmission rate 100 Mbps
DOKUMENTASJON