Dynisco Vertex™ Melt Pressure Sensor Series, mercury free

A new standard in Durability, Environmental Safety, and Reliability
Produktnummer: Vertex

Vertex™ is a Dynisco melt pressure sensor innovation that matches or exceeds the performance of the traditional sensor. The big differences are that Vertex is more robust, much faster, and significantly friendlier to the environment.

The breakthrough technology lies at the tip of the sensor, where melt pressure is registered directly through a single, more robust diaphragm. Direct measurement eliminates errors that can arise in sensors with complicated internal structures, transmission fluids and moving push rods. The Vertex diaphragm is much thicker than those in other sensors and is made of tough Inconel 718 alloy, which provides a higher level of corrosion resistance than stainless steel. For added protection, the tip is coated with a diamond-hardened DyMax® coating. The sensor walls have been fortified to handle side stresses. With all these features, Vertex is the true definition of a robust sensor, proven to deliver long life and a low cost of ownership.

No fill material or moving internal parts
RoHS compliant for sustainability programs
Robust Inconel diaphragm is coated with Dymax®
Diaphragm is much thicker with unique sidewall support
Available with J-type thermocouple temperature output
0-1,500 to 0-10,000 psi pressure range capability
Performance Characteristics
Input, excitation: mV/V: 6-12VDC; mA: 16-36VDC
Output, analog: 3.33mV/V or 4-20mA
Accuracy*: ±0.25% FS
Electronics Operating Temp, max: 185°F (85°C)
Zero Shift (Electronics temp): 0.05%/°F (0.09%/°C)
Span Shift (Electronics temp): 0.005%/°F (0.009%/°C
Hex/Transition Temperature (max): 300°F (150°C)
Zero Shift (Hex temperature): 0.005%/°F (0.009%/°C)
Overload Pressure Rating: 1.5x FS
Pressure Ranges (psi): 1.5M, 3M, 5M, 7.5M or 10M
Pressure Units: PSI, Bar, Kg/cm2, MPa, KPa
Zero Balance Adjustment (±% FS): mV/V: na; mA: ±20%
Zero Balance Setting (±% FS): mV/V: 10%; mA: ±3%
Insulation Resistance: mV/V: 100 MΩ @50VDC;
Internal Shunt Calibration (R-Cal): 80% FSO ±1% FS