Kontakt Logg inn
Kontakt Logg inn

Dataq DI-720 Series Data Acquisition Systems

General Purpose Data Acquisition System with 32 Single-ended Analog Input Channels
Send forespørsel
1 ukes leveringstid
Produktnummer: DI-720

The DI-720 Series and DI-730 Series are families of instruments that offer 14-bit resolution and 150-200kHz waveform recording capability. They communicate through your PC's parallel port or an optional Ethernet or USB interface.

Use the DI-720 for general purpose applications where pre amplified signals are acquired. Examples are process monitoring, and many medical research applications.

Use the DI-730 for wide dynamic range measurements, especially those involving AC or DC electric motors. Examples include paper, aluminum, and steel mills; high speed trains; and rail and seagoing locomotion. The high sample rate, exceptional isolation, and CMR characteristics of the DI-730 make it very well suited for maintenance and troubleshooting of DC drive systems. Other applications include RPM measurements from motor/generators, supply voltage and current measurements, and field current measurements from drive-roll, braking, and take-up motors. See pages 11 and 12 for Application Close ups.

The Ethernet communication option connects DI-720 and DI-730 Series products to any local area network (LAN). Direct Internet access is also possible. This patented (US 7,792,139 B2) communication option uses standard CAT- 5 cable to yield continuous data acquisition throughput rates up to 180kHz. Multiple DI-720/730 products (each equipped with an Ethernet interface) may be daisy-chained together to form an ad-hoc extended network of autonomous, yet fully synchronous data acquisition stations. Each station can sample at a different rate (up to 180kHz throughput) and still maintain full synchronization. Station separation can be as far as 100 meters.

Synchronous and Distributed Data Acquisition
DI-720 For General Purpose Use
Sleek Packaging Measures Only 1.5 × 6 × 9 Inches
Printer Port Interface is Standard, USB or Ethernet Interfaces Are Optional
Ethernet Option supports synchronous and distributed data acquisition up to 100 meters apart. For greater distances between units, use the DI-789 Repeater Switch.
Up To 16-Bit Resolution