Kontakt Logg inn
Kontakt Logg inn

Dataq DI-710 Series Data Logger System

DI-710 Data Logger products operate Stand-alone or PC-connected
Send forespørsel
1 ukes leveringstid
Produktnummer: DI-710

The DATAQ Instruments DI-710 Series of products is a family of instruments for general purpose and stand-alone data logger data acquisition applications. Options include interface type, input voltage range, and PC-connected or standalone data logger operation. Interface options are USB or Ethernet. Gain ranges have selectable factors per channel of 1, 2, 4, and 8, or 1, 10, 100, and 1000. Instruments with the stand-alone data logger option feature a built-in multimedia socket that accepts standard Secure Digital (SD) memories to which acquired data may be stored without a connected PC. SD memories are the same commonly available mass storage devices used with digital cameras and MP3 players. Memories ranging in size from 16 MB to 2 GB are supported. Instruments without this option must remain tethered to a PC’s USB or Ethernet port during data acquisition and use the PC’s own program and memory to store acquired data.

All DI-710 Series products feature 14-bit measurement resolution, sixteen analog input channels that may be configured for single ended or differential operation per channel, and an 8-bit digital bi-directional port. PC-connected instruments stream data to the PC from as low as 0.048 Hz up to as high as 4,800 Hz throughput rate. Stand-alone data loggers store to their SD memory from as low as 0.0017 Hz up to as high as 8,000 samples per second. All DI-710 instruments are supplied with two removable, 16-position screw terminal access connectors.

Low-Cost, Portable, USB or Ethernet Data Logger or Data Acquisition System.
16 single-ended, 8 differential analog inputs.
HMP60 Relative Humidity (RH) and Temperature probe specifically for use with the DI-710.
Stand-alone data logger option allows in-the-field measurements to be saved to Secure Digital Cards (SD).
Built-in Real Time Clock allows automatic time and date stamping of data acquired to SD memory when used in the stand-alone mode.
14-bit analog to digital conversion.
Includes WinDaq Software.
Record up to 8,000 samples per second (assumes SD speeds of 133x or higher) with Stand-alone models or up to 4,800 samples per second with PC-connected instruments (WinDaq/HS required to achieve recording rates over 1,108 Hz with PC-connected instruments).
Measurement range of ±10mV to ±10V (-L Models) or ±1.25V to ±10V (-H Models).