Chroma 6310A series Programmable DC Electronic Load, 200W, 100W×2(Dual), 30W & 250W, 300W, 350W, 600W, 1200W

Nortelco Electronics har fått ny webside

Nortelco Electronics AS ble Adeptor AS fra 1. januar 2022, men dine kontaktpersoner er de samme! Endringen gjelder områdene Elektronikk og Automasjon, og vi har fått ny webside.

6312A Mainframe for 2 Load Modules and 6314A Mainframe for 4 Load Modules
Produktnummer: 6310A

The Chroma 6310A series Programmable DC Electronic Load is ideal for the test and evaluation of multi-output AC/DC power supplies, DC/DC converters, chargers and power electronic components. It is designed for applications in research and development, production, and incoming inspection. The system is configured by plugging the user selectable load modules into the system mainframe. The user interfaces include an ergonomically designed user friendly keypad on the front panel and the following computer interfaces: RS-232, USB or GPIB.

The 6310A series offers 8 different modules with power ratings from 100 watts to 1,200 watts, current ratings from 0.5mA to 240A, and voltage ratings from 0.5mV to 500V. The loads can be operated in constant current, constant voltage, constant power and constant resistance and may be placed in parallel for increased current and power.

The 6310A series can simulate a wide range of dynamic loading applications. The waveforms programmable parameters include: slew rate, load level, duration and conducting voltage. In addition, up to 100 sets of system operating status can be stored in EEPROM and recalled instantly for automated testing applications.

Real time measurement of voltage and current are integrated into each 6310A load module using a 16-bit precision measurement circuit. The user can perform on line voltage measurements and adjustments or simulate short circuit test using the user friendly keypad on the front panel. Additionally, the 6310A series offers an optional remote controller for automated production lines.

The 6310A series has a self-diagnosis routines to maintain instrument performance. It also provides OP, OC, OT protection, and alarm indicating OV, reverse polarity to guarantee quality and reliability for even in the most demanding engineering testing and ATE applications.

Max Power: 200W, 100W×2(Dual), 30W & 250W, 300W, 600W, 1200W
Wide range 0~600V operating voltage
Compatibility between 6310 and 6310A
Up to 8 channels in one mainframe, for testing multiple output SMPS
Parallel load modules up to 1200W for high current and power application
Synchronization with multiple loads
Flexible CC, CR, CP and CV operation modes
Dynamic loading with speeds up to 20kHz
Fast response of 0.32mA/μs~10A/μs slew rate
Minimum input resistance allowing load to sink high current at low voltage
Real time power supply load transient response simulation and output measurement
User programmable 100 sequences. Front panel input status for user-friendly operating
High/Low limits of testing parameters to test GO/NG
Digital I/O control
Over current protection (OCP) testing function
16-bit precision voltage and current measurement with dual-range
Remote sensing capability
Short circuit test
Self-test at power-on
Full Protection: OC, OP, OT protection and OV alarm
USB, GPIB & RS-232 interfaces